30 thousand displaced by new eruption in Sumatra

This morning a column of smoke and ash 2 thousand meters high. Further 8 000 people transferred from the slopes of Mount Sinabung. A man dies from breathing problems caused by airborne ash. Lava flow expected. Indonesia has over 500 active volcanoes.

Jakarta (AsiaNews) - More eight thousand people have fled the slopes of Mount Sinabung after a new volcanic eruption in northern Sumatra, bringing the total to at least 30 000 displaced persons.

The volcano was dormant for 400 years, but for the past two days it has continued to emit smoke and ash and many expect possible lava floods. This morning, the eruption occurred at 6.30 (local time), creating a massive column of smoke 2,000 feet high at least. At least 31 villages six kilometers from the mouth of the crater were evacuated. Mount Sinabung is located in North Sumatra province, 1300 km northwest of Jakarta.

The National Civil Protection is advising residents and displaced people to wear masks. In fact a man died from breathing problems because of the ashes scattered in the atmosphere.

Volcanologists have had to admit little knowledge of the characteristics of Sinabung Mountain, since it’s remained dormant for a long time.

Indonesia is considered the area with the highest number of active volcanoes in the world: at least 500, of which 68 are the most dangerous because they are situated in populated areas like Java and Sumatra.

New View of Tectonic Plates

New View of Tectonic Plates: Computer Modeling of Earth's Mantle

Flow, Plate Motions, and Fault Zones

Computational scientists and geophysicists at the University of Texas at Austin and the California Institute of Technology (Caltech) have developed new computer algorithms that for the first time allow for the simultaneous modeling of Earth's mantle flow, large-scale tectonic plate motions, and the behavior of individual fault zones, to produce an unprecedented view of plate tectonics and the forces that drive it.

A paper describing the whole-earth model and its underlying algorithms will be published in the August 27 issue of the journal Science and also featured on the cover.

The work "illustrates the interplay between making important advances in science and pushing the envelope of computational science," says Michael Gurnis, the John E. and Hazel S. Smits Professor of Geophysics, director of the Caltech Seismological Laboratory, and a coauthor of the Science paper.

To create the new model, computational scientists at Texas's Institute for Computational Engineering and Sciences (ICES) -- a team that included Omar Ghattas, the John A. and Katherine G. Jackson Chair in Computational Geosciences and professor of geological sciences and mechanical engineering, and research associates Georg Stadler and Carsten Burstedde -- pushed the envelope of a computational technique known as Adaptive Mesh Refinement (AMR).

Partial differential equations such as those describing mantle flow are solved by subdividing the region of interest (such as the mantle) into a computational grid. Ordinarily, the resolution is kept the same throughout the grid. However, many problems feature small-scale dynamics that are found only in limited regions. "AMR methods adaptively create finer resolution only where it's needed," explains Ghattas. "This leads to huge reductions in the number of grid points, making possible simulations that were previously out of reach."

"The complexity of managing adaptivity among thousands of processors, however, has meant that current AMR algorithms have not scaled well on modern petascale supercomputers," he adds. Petascale computers are capable of one million billion operations per second. To overcome this long-standing problem, the group developed new algorithms that, Burstedde says, "allows for adaptivity in a way that scales to the hundreds of thousands of processor cores of the largest supercomputers available today."

With the new algorithms, the scientists were able to simulate global mantle flow and how it manifests as plate tectonics and the motion of individual faults. According to Stadler, the AMR algorithms reduced the size of the simulations by a factor of 5,000, permitting them to fit on fewer than 10,000 processors and run overnight on the Ranger supercomputer at the National Science Foundation (NSF)-supported Texas Advanced Computing Center.

A key to the model was the incorporation of data on a multitude of scales. "Many natural processes display a multitude of phenomena on a wide range of scales, from small to large," Gurnis explains. For example, at the largest scale -- that of the whole earth -- the movement of the surface tectonic plates is a manifestation of a giant heat engine, driven by the convection of the mantle below. The boundaries between the plates, however, are composed of many hundreds to thousands of individual faults, which together constitute active fault zones. "The individual fault zones play a critical role in how the whole planet works," he says, "and if you can't simulate the fault zones, you can't simulate plate movement" -- and, in turn, you can't simulate the dynamics of the whole planet.

In the new model, the researchers were able to resolve the largest fault zones, creating a mesh with a resolution of about one kilometer near the plate boundaries. Included in the simulation were seismological data as well as data pertaining to the temperature of the rocks, their density, and their viscosity -- or how strong or weak the rocks are, which affects how easily they deform. That deformation is nonlinear -- with simple changes producing unexpected and complex effects.

"Normally, when you hit a baseball with a bat, the properties of the bat don't change -- it won't turn to Silly Putty. In the earth, the properties do change, which creates an exciting computational problem," says Gurnis. "If the system is too nonlinear, the earth becomes too mushy; if it's not nonlinear enough, plates won't move. We need to hit the 'sweet spot.'"

After crunching through the data for 100,000 hours of processing time per run, the model returned an estimate of the motion of both large tectonic plates and smaller microplates -- including their speed and direction. The results were remarkably close to observed plate movements.

In fact, the investigators discovered that anomalous rapid motion of microplates emerged from the global simulations. "In the western Pacific," Gurnis says, "we have some of the most rapid tectonic motions seen anywhere on Earth, in a process called 'trench rollback.' For the first time, we found that these small-scale tectonic motions emerged from the global models, opening a new frontier in geophysics."

One surprising result from the model relates to the energy released from plates in earthquake zones. "It had been thought that the majority of energy associated with plate tectonics is released when plates bend, but it turns out that's much less important than previously thought," Gurnis says. "Instead, we found that much of the energy dissipation occurs in the earth's deep interior. We never saw this when we looked on smaller scales."

---

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by California Institute of Technology.

---

Journal Reference:

1. G. Stadler, M. Gurnis, C. Burstedde, L. C. Wilcox, L. Alisic, O. Ghattas. The Dynamics of Plate Tectonics and Mantle Flow: From Local to Global Scales. Science, 2010; 329 (5995): 1033 DOI: 10.1126/science.1191223

Shrinking Atmospheric Layer

Shrinking Atmospheric Layer Linked to Low Levels of Solar Radiation

Large changes in the sun's energy output may drive unexpectedly dramatic fluctuations in Earth's outer atmosphere.

Results of a new study link a recent, temporary shrinking of a high atmospheric layer with a sharp drop in the sun's ultraviolet radiation levels.

The research, led by scientists at the National Center for Atmospheric Research (NCAR) in Boulder, Colo., and the University of Colorado at Boulder (CU), indicates that the sun's magnetic cycle, which produces differing numbers of sunspots over an approximately 11-year cycle, may vary more than previously thought.

The results, published in the American Geophysical Union journalGeophysical Research Letters, are funded by NASA and by the National Science Foundation (NSF), NCAR's sponsor.

"This research makes a compelling case for the need to study the coupled sun-Earth system," says Farzad Kamalabadi, program director in NSF's Division of Atmospheric and Geospace Sciences, "and to illustrate the importance of solar influences on our terrestrial environment with both fundamental scientific implications and societal consequences."

The findings may have implications for orbiting satellites, as well as for the International Space Station.

"Our work demonstrates that the solar cycle not only varies on the typical 11-year time scale, but also can vary from one solar minimum to another," says lead author Stanley Solomon, a scientist at NCAR's High Altitude Observatory. "All solar minima are not equal."

The fact that the layer in the upper atmosphere known as the thermosphere is shrunken and dense means that satellites can more easily maintain their orbits.

But it also indicates that space debris and other objects that pose hazards may persist longer in the thermosphere.

"With lower thermospheric density, our satellites will have a longer life in orbit," says CU professor Thomas Woods, a co-author.

"This is good news for those satellites that are actually operating, but it is also bad because of the thousands of non-operating objects remaining in space that could potentially have collisions with our working satellites."

The sun's energy output declined to unusually low levels from 2007 to 2009, a particularly prolonged solar minimum during which there were virtually no sunspots or solar storms.

During that same period of low solar activity, Earth's thermosphere shrank more than at any time in the 43-year era of space exploration.

The thermosphere, which ranges in altitude from about 55 to more than 300 miles (90 to 500 kilometers), is a rarified layer of gas at the edge of space where the sun's radiation first makes contact with Earth's atmosphere.

It typically cools and becomes less dense during low solar activity.

But the magnitude of the density change during the recent solar minimum appeared to be about 30 percent greater than would have been expected by low solar activity.

The study team used computer modeling to analyze two possible factors implicated in the mystery of the shrinking thermosphere.

They simulated both the impacts of solar output and the role of carbon dioxide, a potent greenhouse gas that, according to past estimates, is reducing the density of the outer atmosphere by about 2 percent to 5 percent per decade.

Their work built on several recent studies.

Earlier this year, a team of scientists from the Naval Research Laboratory and George Mason University, measuring changes in satellite drag, estimated that the density of the thermosphere declined in 2007-09 to about 30 percent less than during the previous solar minimum in 1996.

Other studies by scientists at the University of Southern California and CU, using measurements from sub-orbital rocket flights and space-based instruments, have estimated that levels of extreme-ultraviolet radiation-a class of photons with extremely short wavelengths-dropped about 15 percent during the same period.

However, scientists remained uncertain whether the decline in extreme-ultraviolet radiation would be sufficient to have such a dramatic impact on the thermosphere, even when combined with the effects of carbon dioxide.

To answer this question, Solomon and his colleagues turned to an NCAR computer tool, known as the Thermosphere-Ionosphere-Electrodynamics General Circulation Model.

They used the model to simulate how the sun's output during 1996 and 2008 would affect the temperature and density of the thermosphere.

They also created two simulations of thermospheric conditions in 2008-one with a level that approximated actual carbon dioxide emissions and one with a fixed, lower level.

The results showed the thermosphere cooling in 2008 by 41 kelvins, or K (about 74 degrees Fahrenheit) compared to 1996, with just 2 K attributable to the carbon dioxide increase.

The results also showed the thermosphere's density decreasing by 31 percent, with just 3 percent attributable to carbon dioxide, and closely approximated the 30 percent reduction in density indicated by measurements of satellite drag.

"It is now clear that the record low temperature and density were primarily caused by unusually low levels of solar radiation at the extreme-ultraviolet level," Solomon says.

Woods says the research indicates that the sun could be going through a period of relatively low activity, similar to periods in the early 19th and 20th centuries.

This could mean that solar output may remain at a low level for the near future.

"If it is indeed similar to certain patterns in the past, then we expect to have low solar cycles for the next 10 to 30 years," Woods says.

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by National Science Foundation.

---

Journal Reference:

1. Stanley C. Solomon, Thomas N. Woods, Leonid V. Didkovsky, John T. Emmert, Liying Qian. Anomalously low solar extreme-ultraviolet irradiance and thermospheric density during solar minimum.Geophysical Research Letters, 2010; 37 (16): L16103 DOI:10.1029/2010GL044468

El Niños Are Growing Stronger

El Niños Are Growing Stronger, NASA/NOAA Study Finds

A relatively new type of El Niño, which has its warmest waters in the central-equatorial Pacific Ocean, rather than in the eastern-equatorial Pacific, is becoming more common and progressively stronger, according to a new study by NASA and NOAA. The research may improve our understanding of the relationship between El Niños and climate change, and has potentially significant implications for long-term weather forecasting.

Lead author Tong Lee of NASA's Jet Propulsion Laboratory, Pasadena, Calif., and Michael McPhaden of NOAA's Pacific Marine Environmental Laboratory, Seattle, measured changes in El Niño intensity since 1982. They analyzed NOAA satellite observations of sea surface temperature, checked against and blended with directly-measured ocean temperature data. The strength of each El Niño was gauged by how much its sea surface temperatures deviated from the average. They found the intensity of El Niños in the central Pacific has nearly doubled, with the most intense event occurring in 2009-10.

The scientists say the stronger El Niños help explain a steady rise in central Pacific sea surface temperatures observed over the past few decades in previous studies-a trend attributed by some to the effects of global warming. While Lee and McPhaden observed a rise in sea surface temperatures during El Niño years, no significant temperature increases were seen in years when ocean conditions were neutral, or when El Niño's cool water counterpart, La Niña, was present.

"Our study concludes the long-term warming trend seen in the central Pacific is primarily due to more intense El Niños, rather than a general rise of background temperatures," said Lee.

"These results suggest climate change may already be affecting El Niño by shifting the center of action from the eastern to the central Pacific," said McPhaden. "El Niño's impact on global weather patterns is different if ocean warming occurs primarily in the central Pacific, instead of the eastern Pacific.

"If the trend we observe continues," McPhaden added, "it could throw a monkey wrench into long-range weather forecasting, which is largely based on our understanding of El Niños from the latter half of the 20th century."

El Niño, Spanish for "the little boy," is the oceanic component of a climate pattern called the El Niño-Southern Oscillation, which appears in the tropical Pacific Ocean on average every three to five years. The most dominant year-to-year fluctuating pattern in Earth's climate system, El Niños have a powerful impact on the ocean and atmosphere, as well as important socioeconomic consequences. They can influence global weather patterns and the occurrence and frequency of hurricanes, droughts and floods; and can even raise or lower global temperatures by as much as 0.2 degrees Celsius (0.4 degrees Fahrenheit).

During a "classic" El Niño episode, the normally strong easterly trade winds in the tropical eastern Pacific weaken. That weakening suppresses the normal upward movement of cold subsurface waters and allows warm surface water from the central Pacific to shift toward the Americas. In these situations, unusually warm surface water occupies much of the tropical Pacific, with the maximum ocean warming remaining in the eastern-equatorial Pacific.

Since the early 1990s, however, scientists have noted a new type of El Niño that has been occurring with greater frequency. Known variously as "central-Pacific El Niño," "warm-pool El Niño," "dateline El Niño" or "El Niño Modoki" (Japanese for "similar but different"), the maximum ocean warming from such El Niños is found in the central-equatorial, rather than eastern, Pacific. Such central Pacific El Niño events were observed in 1991-92, 1994-95, 2002-03, 2004-05 and 2009-10. A recent study found many climate models predict such events will become much more frequent under projected global warming scenarios.

Lee said further research is needed to evaluate the impacts of these increasingly intense El Niños and determine why these changes are occurring. "It is important to know if the increasing intensity and frequency of these central Pacific El Niños are due to natural variations in climate or to climate change caused by human-produced greenhouse gas emissions," he said.

Results of the study were published recently in Geophysical Research Letters.

For more information on El Niño, visit:http://sealevel.jpl.nasa.gov/.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by NASA/Jet Propulsion Laboratory.

Distant Star's Sound Waves Reveal Cycle Similar to the Sun's

In a bid to unlock longstanding mysteries of the Sun, including the impacts on Earth of its 11-year cycle, an international team of scientists has successfully probed a distant star. By monitoring the star's sound waves, the team has observed a magnetic cycle analogous to the Sun's solar cycle.

The study, conducted by scientists at the National Center for Atmospheric Research (NCAR) and colleagues in France and Spain, is being published in Science.

The scientists studied a star known as HD49933, which is located 100 light years from Earth in the constellation Monoceros, the Unicorn, just east of Orion. The team examined the star's acoustic fluctuations, using a technique called "stellar seismology." They detected the signature of "starspots," areas of intense magnetic activity on the surface that are similar to sunspots. While scientists have previously observed these magnetic cycles in other stars, this was the first time they have discovered such a cycle using stellar seismology.

"Essentially, the star is ringing like a bell," says NCAR scientist Travis Metcalfe, a co-author of the new study. "As it moves through its starspot cycle, the tone and volume of the ringing changes in a very specific pattern, moving to higher tones with lower volume at the peak of its magnetic cycle."

"We've discovered a magnetic activity cycle in this star, similar to what we see with the Sun," says co-author and NCAR scientist Savita Mathur. "This technique of listening to the stars will allow us to examine potentially hundreds of stars."

The team hopes to assess the potential for other stars in our galaxy to host planets, including some perhaps capable of sustaining life.

"Understanding the activity of stars harboring planets is necessary because magnetic conditions on the star's surface could influence the habitable zone, where life could develop," says CEA-Saclay scientist Rafael Garcia, the study's lead author.

Studying many stars with stellar seismology could help scientists better understand how magnetic activity cycles can differ from star to star, as well as the processes behind such cycles. The work could especially shed light on the magnetic processes that go on within the Sun, furthering our understanding of its influence on Earth's climate. It may also lead to better predictions of the solar cycle and resulting geomagnetic storms that can cause major disruption to power grids and communication networks.

In addition to NCAR, the team's scientists are from France's Center for Nuclear Studies of Saclay (CEA-Saclay), Paris/Meudon Observatory (OPM), the University of Toulouse, and Spain's Institute of Astrophysics of the Canaries (IAC). The research was funded by the National Science Foundation, which is NCAR's sponsor, the CEA, the French Stellar Physics National Research Plan, and the Spanish National Research Plan.

Classifying stars

The scientists examined 187 days of data captured by the international Convection Rotation and Planetary Transits (CoRoT) space mission.

Launched on December 27, 2006, CoRoT was developed and is operated by the French National Center for Space Studies (CNES) with contributions from Austria, Belgium, Brazil, Germany, Spain, and the European Space Agency. CoRoT is equipped with a 27-centimeter (11-inch) diameter telescope and a 4-CCD (charge-coupled device) camera sensitive to tiny variations in the light intensity from stars.

The study authors found that HD49933 is much bigger and hotter than the Sun, and its magnetic cycle is much shorter. Whereas past surveys of stars have found cycles similar to the 11-year cycle of the Sun, this star has a cycle of less than a year.

This short cycle is important to scientists because it may enable them to observe an entire cycle more quickly, thereby gleaning more information about magnetic patterns than if they could only observe part of a longer cycle.

The scientists plan to expand their observations by using other stars observed by CoRoT as well as data from NASA's Kepler mission, launched in March 2009. Kepler is seeking Earth-sized planets to survey. The mission will provide continuous data over three to five years from hundreds of stars that could be hosting planets.

"If it turns out that a short magnetic cycle is common in stars, then we will potentially observe a large number of full cycles during Kepler's mission," says Metcalfe. "The more stars and complete magnetic cycles we have to observe, the more we can place the Sun into context and explore the impacts of magnetic activity on possible planets hosted by these stars."

The team has spent the past six months exploring the structure and dynamics of HD49933 and classifying its size. They will next verify their observations using ground-based telescopes to confirm the magnetic activity of the star. When the star reemerges from behind the Sun in September, they hope to measure the full length of the cycle. The CoRoT mission was designed to collect up to 150 days of continuous data at a time, which was not enough to determine the exact length of the star's cycle.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by National Center for Atmospheric Research/University Corporation for Atmospheric Research.

---

Journal Reference:

1. Rafael A. García, Savita Mathur, David Salabert, Jérôme Ballot, Clara Régulo, Travis S. Metcalfe, and Annie Baglin.CoRoT Reveals a Magnetic Activity Cycle in a Sun-Like Star. Science, 2010; 329 (5995): 1032 DOI:10.1126/science.1191064

Recycling Without Sorting

Recycling Without Sorting
Engineers Create Recycling Plant That Removes The Need To Sort

---------------------------------------------------------------------------------
Engineers use the term single-stream recycling for their plant that takes the sorting out of the public’s hands. Trucks dump an unsorted mess of paper, plastic, and metal onto a conveyor belt. Magnets, air blowers, and optical scanners separate the items, making it possible to recycle the different products.

Recycling programs have been underway for years, but Americans still lag behind on recycling efforts. The biggest reason -- it's inconvenient.

If you recycle, you know the drill ... separate ... separate ... separate ...

"In the early years, we've had to separate things fairly significantly," recycler Steve Snowden says.

Now, Snowden's separating days are over. A new program called "Single Stream Recycling" allows you to put all recycle items into one container.

"We like it quite a bit because it is so easy," Snowden says.

Leaving the rest of the work up to someone else!

"We do the separation to mechanically separate the materials here at the recycling facility," says Michael Taylor, environmental scientist from Waste Management Recycle America, who developed the system.

Fast, rotating devices separate newspaper and cardboard from cans and glass that tumble to another level. Magnets grab metal cans and optical scanners recognize plastic from other items and trigger blasts of air to blow plastic into another bin.

"Highly-engineered, highly complex mechanical systems do the work in a much more efficient, much more cost effective and much more significantly faster-paced environment," Taylor explains.

Environmental scientists have seen an increase in recycling of almost 30-percent among homeowners who use the system.

"We're much more liable to do something the easier it is to do it," Snowden says.

There are 27 Waste Management Recycle America "Single Stream Recycling" facilities in the country. There are also other recycling organizations that use Single Stream.

The Materials Research Society and the Optical Society of America contributed to the information contained in the TV portion of this report.

PROS AND CONS: If residents don't have to maintain separate containers for their glass, bottles, paper and plastic supporters of the plant say that this encourages more people to participate in recycling. Residents can simply load all recyclables into a single container to be sorted at the plant. It also reduces costs for local governments, because less expensive trucks can be used if the waste material isn't sorted beforehand. Trucks cost $50,000 each more equipment to keep paper and other materials separate, for example. Critics say such a single-stream plant is inefficient and diminishes the usefulness of the materials collected, because it opts for speed to process the vast quantities of mixed recyclable waste it receives. There is more contamination as a result, which degrades the quality of what is sorted.

HOW IT WORKS: The plant uses a variety of sorting devices, including screens, magnets and ultraviolet optical scanners that trigger blasts of air to separate plastic bottles from the rest of the items, as well as spinning, star-shaped plastic devices that separate newspaper from cans and bottles by pushing the paper higher up an inclined screen so the heavier, smaller cans and bottles tumble down to a lower level. Glass is sorted by color and crushed, while plastic is shredded into small chips.

RECYCLING TIPS:

* Recycle all paper (junk mail, boxes, magazines, envelopes), bottles and cans (aluminum, glass, metal, and plastic).

* Buy products with little or no packaging, and buy the largest size you can use.

* Buy reusable products such as non-disposable cameras, electric razors, reusable lunch boxes, etc.

* Bring your own mug to the office or local coffee house for coffee; paper cups waste both money and landfill space.

* Buy products made with recycled materials.

* Reduce your junk mail by canceling unwanted catalogs.

* Bring your own reusable grocery sacks when shopping at the local supermarket.

Revolutionary New Desalination Membrane

Salt stacks at a desalination plant in Trapani, Sicily (Italy). (Credit: iStockphoto/Beat Bieler)

---------------------------------------------------

Hold the Salt: Engineers Develop Revolutionary New Desalination Membrane.

-----------------------------------------------------------------------------------------------------------

Researchers from the UCLA Henry Samueli School of Engineering and Applied Science have unveiled a new class of reverse-osmosis membranes for desalination that resist the clogging which typically occurs when seawater, brackish water and waste water are purified.

The highly permeable, surface-structured membrane can easily be incorporated into today's commercial production system, the researchers say, and could help to significantly reduce desalination operating costs. Their findings appear in the current issue of the Journal of Materials Chemistry.

Reverse-osmosis (RO) desalination uses high pressure to force polluted water through the pores of a membrane. While water molecules pass through the pores, mineral salt ions, bacteria and other impurities cannot. Over time, these particles build up on the membrane's surface, leading to clogging and membrane damage. This scaling and fouling places higher energy demands on the pumping system and necessitates costly cleanup and membrane replacement.

The new UCLA membrane's novel surface topography and chemistry allow it to avoid such drawbacks.

"Besides possessing high water permeability, the new membrane also shows high rejection characteristics and long-term stability," said Nancy H. Lin, a UCLA Engineering senior researcher and the study's lead author. "Structuring the membrane surface does not require a long reaction time, high reaction temperature or the use of a vacuum chamber. The anti-scaling property, which can increase membrane life and decrease operational costs, is superior to existing commercial membranes."

The new membrane was synthesized through a three-step process. First, researchers synthesized a polyamide thin-film composite membrane using conventional interfacial polymerization. Next, they activated the polyamide surface with atmospheric pressure plasma to create active sites on the surface. Finally, these active sites were used to initiate a graft polymerization reaction with a monomer solution to create a polymer "brush layer" on the polyamide surface. This graft polymerization is carried out for a specific period of time at a specific temperature in order to control the brush layer thickness and topography.

"In the early years, surface plasma treatment could only be accomplished in a vacuum chamber," said Yoram Cohen, UCLA professor of chemical and biomolecular engineering and a corresponding author of the study. "It wasn't practical for large-scale commercialization because thousands of meters of membranes could not be synthesized in a vacuum chamber. It's too costly. But now, with the advent of atmospheric pressure plasma, we don't even need to initiate the reaction chemically. It's as simple as brushing the surface with plasma, and it can be done for almost any surface."

In this new membrane, the polymer chains of the tethered brush layer are in constant motion. The chains are chemically anchored to the surface and are thus more thermally stable, relative to physically coated polymer films. Water flow also adds to the brush layer's movement, making it extremely difficult for bacteria and other colloidal matter to anchor to the surface of the membrane.

"If you've ever snorkeled, you'll know that sea kelp move back and forth with the current or water flow," Cohen said. "So imagine that you have this varied structure with continuous movement. Protein or bacteria need to be able to anchor to multiple spots on the membrane to attach themselves to the surface -- a task which is extremely difficult to attain due to the constant motion of the brush layer. The polymer chains protect and screen the membrane surface underneath."

Another factor in preventing adhesion is the surface charge of the membrane. Cohen's team is able to choose the chemistry of the brush layer to impart the desired surface charge, enabling the membrane to repel molecules of an opposite charge.

The team's next step is to expand the membrane synthesis into a much larger, continuous process and to optimize the new membrane's performance for different water sources.

"We want to be able to narrow down and create a membrane selection system for different water sources that have different fouling tendencies," Lin said. "With such knowledge, one can optimize the membrane surface properties with different polymer brush layers to delay or prevent the onset of membrane fouling and scaling.

"The cost of desalination will therefore decrease when we reduce the cost of chemicals [used for membrane cleaning], as well as process operation [for membrane replacement]. Desalination can become more economical and used as a viable alternate water resource."

Cohen's team, in collaboration with the UCLA Water Technology Research (WaTeR) Center, is currently carrying out specific studies to test the performance of the new membrane's fouling properties under field conditions.

"We work directly with industry and water agencies on everything that we're doing here in water technology," Cohen said. "The reason for this is simple: If we are to accelerate the transfer of knowledge technology from the university to the real world, where those solutions are needed, we have to make sure we address the real issues. This also provides our students with a tremendous opportunity to work with industry, government and local agencies."

A paper providing a preliminary introduction to the new membrane also appeared in the Journal of Membrane Science last month.

The original article was written by Wileen Wong Kromhout.

---

Journal References:

1. Nancy H. Lin, Myung-man Kim, Gregory T. Lewis, Yoram Cohen. Polymer surface nano-structuring of reverse osmosis membranes for fouling resistance and improved flux performance. Journal of Materials Chemistry, 2010; DOI: 10.1039/b926918e
2. Myung-man Kim, Nancy H. Lin, Gregory T. Lewis, Yoram Cohen. Surface nano-structuring of reverse osmosis membranes via atmospheric pressure plasma-induced graft polymerization for reduction of mineral scaling propensity. Journal of Membrane Science, 2010; DOI: 10.1016/j.memsci.2010.02.053